3mm thick solar panel used widely in the marine and camping industry for charging 12V batteries. Two panels can be connected together to charge 24V battery systems.


The solar cells are "A" grade American. The solar panel is assembled in China.


Installation of the panel can be done permanently by using an adhesive to stick the panel down or by using screws through the preinstalled battery eyelets. The mounting surface does not have to be completely flat as the panel is able to curve in a semi flexible manner to adhere to most surfaces.


The panel comes with 600mm of wire including MC4 Connectors.


The wiring block is on the front of the panel so the panel can be installed flat to a surface.


This size panel is great to keep your batteries charged when on the extended fishing or camping trips or just for those days on the water when you need lots of power put back into your 12V batteries (or 24V battery bank when two panels are connected together).


This panel can be connected to a dual battery solar controller and charge two 12V batteries at the same time.


This panel can also be used to maintain any 12V battery when hooked to a suitable 12V regulator.


Unlike glass faced panels if broken there is NO GLASS so you do not have to worry about glass in the boat or camping area. They can take the rough weather. You can walk on them if mounted to a strong flat surface (no high heel shoes though).